MY 1st PCB

MY 1st Bot

 Here's My 1st Bot

HOW TO START PIC MICROCONTROLLER PROGRAMING

If you are fed up with soldering ICs ,resistors and all that. You may fing that PIC is a good solution.

FOLLOW the following steps care fully
I did the same so I guarantee u won't get a trouble

STEP1;making the programmer  above is the same programmer I'm still using
it works well with 16F84A,16F88& also with 16F877A
here is a simple table of pin connection

 

here is a soft to check your programmer and to programmer
here is winpic800

    start the soft and plug the programmer u made to com port
then click on

then if ur programmer is ok then u should see

STEP2;Here goes programming
                   download MPLAB
                   MPLAB download
                                                1ST PROJECT
                                       INSTALL & START MPLAB FOLLOW THE PrOject wizard