HOW TO START PIC MICROCONTROLLER PROGRAMING

If you are fed up with soldering ICs ,resistors and all that. You may fing that PIC is a good solution.

FOLLOW the following steps care fully
I did the same so I guarantee u won't get a trouble

STEP1;making the programmer  above is the same programmer I'm still using
it works well with 16F84A,16F88& also with 16F877A
here is a simple table of pin connection

 

here is a soft to check your programmer and to programmer
here is winpic800

    start the soft and plug the programmer u made to com port
then click on

then if ur programmer is ok then u should see

STEP2;Here goes programming
                   download MPLAB
                   MPLAB download
                                                1ST PROJECT
                                       INSTALL & START MPLAB FOLLOW THE PrOject wizard